|
| |
The Urban Pipe Bag
 
I am very proud to introduce this new pipe bag design. I call it the Urban
Pipe Bag. Like all of my bags, it is 100% leather with the exception of the
brass clips and such and the zippers. Each bag has two outside pockets and a
long shoulder strap. As seen below, the bag
interiors are 100% customizable and any bag can be ordered specific to your
needs. The general dimensions of the bag at it's largest points is 19 x 11
x 7. As you can see, the bag tapers so exact measurements are hard to list but
I'm sure you get the general idea, the bag will hold everything you need to take
and then some.
The bags start at $350 and depending on the leather and the configuration go
to about $500. Most will average in the $400 range.
Liner A is my design for pipe transport. As in the ultimate
pipe bags, the pipe pockets are expandable and will each hold two normal sized
pipes stored in their pipe socks quite comfortably. If you get two pipe
sides, figure it should hold 12 pipes. The rectangle above the pipe pockets is a
roomy pocket as well. All of the pipe bags have a tamper and lighter pocket as well.
Liner B as shown contains a metal cigar tube as well as a
flask. It can easily be made to carry several cigar tubes but this version has a
small and large pocket. liner B can be made for additional cigar tubes as well.
Liner C as shown has a 2 large pockets and some smaller ones
for pens, pocket knife, phone, etc.
Liner D has a zippered pocket with a large drop in pocket
behind it and the upper pocket.
If you order a bag custom made you can have any combination of
liner sides shown below or make one up.
Liner A - Standard
Pipe Liner B - Standard Cigar/Flask
(see pic below)

Liner C - Standard Non Pipe - No
Zipper
Liner D - Standard Non Pipe Zipper/Non Zipper

|